You are here:Home > PRODUCT

Ultrafine Grinding Mill

Feeding size:≤20mm

Fineness:325-3000 mesh

Capacity:0.4-30 t/h

Application:widely used in small and medium mining, chemicals, building materials, metallurgy, refractories, pharmaceuticals, cement and other industries

Live Chat Send-Email

Overview

  •  Types of Ultrafine grinding mill:

    —— five models: HGM80, HGM90, HGM100, HGM125and HGM1680L
    ——finished production fineness: 250meshes-2500meshes, 5-74 micron
    ——the capacity (ton/hour) ranges from 0.4T/H to 30T/H
     
    Work Principle of ultrafine grinding mill:
    HGM series ultrafine grinding mill mainly consist of main unit, classifier, powder collector, dust cleaner, blower, muffler, sound-proof room, crusher, bucket elevator, storage hopper, and vibrating feeder.
     
    After crushed by hammer crusher, the large materials become small ones and are sent to storage hopper by elevator, and then evenly sent to the upper distribution plate of the turn plate by vibrating feeder and sloping feeding pipe. When the grinding mill is at work, the main bearing and each dial are driven by electromotor through reducer, and all the grinding rollers are rolling in the ring channels driving by dial through plunger. The materials are driven to the edge of the turn plate by the centrifugal force and fall down into the grinding chambers. The high-pressure air blower constantly inhales air, airflow with crushed materials are brought to classifier whose high-speed impeller will screen the airflow: The unqualified particle size will fall and return to the mill for being reground while the qualified particle size mixed with air will go into the cyclone powder collector. Most of the qualified powders will fall and exit from the discharging valve at the bottom; A small proportion of the fine powders, with airflow, moves to the dust cleaner. The materials from the above two lots are sent by the conveyor to get finished powders packed. In addition, filtered clean air will be emitted from muffler in the end.
     
    Features of ultrafine grinding mill:
    High Efficiency
    Under the same finished final size and the same motor power, the capacity of ultrafine grinding mill is twice as much as jet mill, mixing grinder and ball mill, and energy consumption decreased 30%.
    Long lifecycle of spare parts
    The ring and roller are forged by special material with high utilization,the lifetime can reach 2-5 years for grinding calcite carbonate.
    High safety and reliability
    As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.
    High fineness, flexible adjustment
    The final fineness of the grinding materials can be adjusted between 250 meshes and 2500 mesh (74-5 micron), and the product fineness can reach D97≤5μm.
    Environment-friendly
    The application of pulse bag filter and muffler greatly alleviates dust pollution and noise.
    Advanced intelligent speed control device
    Convenient adjusting, more uniform particle size.
Main specification of ultrafine mill:
Model
HGM80
HGM90
HGM100
HGM125
HGM1680L
Ring Diameter(mm)
800
900
1000
1250
1680
Ring Number (PCS)
3
3-4
4
4
4
Roller Number(PCS)
18-21
24-29
28-36
30-44
30-40
Main Shaft Speed (r. p. min)
230-240
200-220
180-200
135-155
120-130
Input Size (mm)
≤10
≤10
≤15
≤15
≤20
Finished Size (um/mesh)
74-5
(200-2500)
74-5
(200-2500)
74-5
(200-2500)
100-6
(150-2000)
100-9
(150-1500)
Capacity (t/h)
0.4-4.5
0.6-6.5
1-9
2-16
3.8-30
Outlet Size L*W*H (m)
13.9*4*6.2
14.7*4.8*7.2
18*4.6*8.6
14*9*10.25
26.3*7.5*11.9

CONTACT

  1. Please fill in your name and your message and do not forget mail and/or phone if you like to be contacted. Please note that you do not need to have a mail programme to use this function.
  2. Tel:+86-21-20236178 Email:sales@clirik.com Address:No.19 Fuqing Rd, Pudong New Area, Shanghai,China