Calcium Carbonate Mill

Overview

• Calcium carbonate Powder Grinding Processing Application:

  Calcium carbonate through grinding mill machine deep processing can be widely used in the following industries:
  1. Within 200 mesh: used in a variety of feed additives calcium content more than 55.6 without harmful ingredients.
  2. 250 mesh to 300 mesh: plastic factory, rubber factory, paint factory, waterproof material plant highland interior and exterior materials and paint. Whiteness is above 85 degrees.
  3. 350 mesh to 400 mesh: used in the manufacture pinch, the water pipes, chemical. Whiteness is above 93 degrees.
  4. 400 mesh to 600 mesh: used in toothpaste paste, soap. Whiteness is above 94 degrees.
  5. 800 mesh: used in rubber, plastics, cables, pvc, whiteness is above 94 degrees.
  6. 1250 mesh: pvc, PE, paint, paint grade products, paper primer, paper coating, whiteness of 95 degrees or more. With high purity, high whiteness, non-toxic, odorless, fine oil low, low hardness.
  7. Calcium carbonate can be used as agents: absorption rate of up to 39%.
  8. Calcium carbonate alkaline, commonly used in acidic soil improvement
  9. Calcium carbonate can also be used in the laboratory preparation of carbon dioxid.

   

  Calcium carbonate Powder Grinding Mill plant:
  Clirik Machinery devoted to provide Calcium carbonate processing and grinding solution,The recommended Calcium carbonate Powder grinding Machine is YGM raymond Mill and HGM Ultrafine Mill, which meets client’s requirements of excellent fineness, reliable performance and favorable price.Clirik Calcium carbonate Grinding Mill is mainly applied to non-inflammable, non-explosive and brittle materials with Mohs’ hardness under six. Such as calcite, chalk, Calcium carbonate, dolomite, kaolin, talc, etc, totally more than 100 kinds of materials. Product fineness can be controlled between 0~3000 mesh.

   

  If you want to processing Calcium carbonate,please choose the following plant:

  >> Coarse powder grinding mill: output size below 3mm, capacity 100t/h
  >> YGM high pressure suspension grinding mill: output size between 15-425meshes
  >> HGM three-ring micro powder grinding mill: output size between 200-3000meshes (can be adjusted)

  
  
  Calcium carbonate Grinding process Flow:
  Configured Equipment: Hopper+ Bucket Elevator+Vibrating Feeder +Grinding Mill+ Cyclones + Bag Filter
  Stage 1. Calcium carbonate are transported into hopper by truck, and then lifted into storage silo of main machine by bucket elevator.
  Stage 2. Calcium carbonate comes from hopper and feed into main mill uniformly by vibrating feeder, then goes into pipes.
  Stage 3. In the grinding process, qualified final product after screening system will go into powder collector by pipes, and then go out from outlet. Unqualified product will go back to main mill and regrind until it is qualified.
  Stage 4. The air flow after purification will go into fan from pipes that up the bag filter, the wind is circular, all other pipes airflow is flow in negative pressure except the pipe from fan to main mill.
   

   

  Shanghai Clirik Machinery Company is the supplier and manufacturer for the Grinding Mill.After more than 10 years, our company have passed the ISO9001:2008, and the equipment is gotten the CE certification. Under our extensive experience, we can design the optimized and reasonable powder processing line to meet each customers's request.

Recommend Products

1. Ultrafine Grinding Mill
2. Ball Mill
3. Raymond Mill
4. Vertical Roller Grinding Mill