YGM high pressure suspension grinding mill supplier

2020-01-09

YGM High pressure suspension grinding mill can also be called a high-pressure roller Raymond mill, referred to as a high pressure mill, high pressure grinding mill, suspension mill.

Applies to below 6% moisture and hardness of the material of no greater than 9.3, the particle size of the products can be adjusted in the range 80-425 purposes, the most fine-grained up to 1000 mesh.

Mainly applied to a conventional polishing material crushing, such as kaolin, limestone, calcite, marble, talc, barite, gypsum, red iron oxide, green, aluminum hydroxide, pigment, bentonite, clay and the like.


High Pressure Suspension Grinding Mill widely used in metallurgy, chemical industry, mining, highway construction, water utilities and other industries, mainly suitable for machining Mohs hardness of 9.3 or less, various non-flammable and humidity of 6% or less The processing of explosive mineral materials is ideal for processing quartz, feldspar, calcite, limestone, talc, ceramics, marble, granite, dolomite, bauxite, iron ore, barite, bentonite, coal gangue, coal and other materials. Alternatively, the fineness of the finished product can be adjusted between 0.613 mm to 0.033 mm. By adding special means inside the machine, the device can produce 30 to 80 mesh coarse powder.

Complete set of equipment, blower, dust collector, jaw crusher, bucket elevator, electromagnetic vibration feeder, electrical control system, etc.
 

Working Principle of YGM High Pressure Suspension Grinding Mill

High pressure suspension grinding mill host, the roller assembly supported by a cross roller shaft hung on the hanger, roller blade knife hanger with the spindle and fixedly connected to, the compression spring bearing against the roller outer chamber of the boom an end face to cross arm serving as a fulcrum to force the grinding roller axis tightly pressed against the inner peripheral surface grinding ring, when the spindle is rotated via a transmission main drive motor, mounted on the turret on the shovel blade rotates in synchronization with the roller, grinding in the roll mill while rolling circle ring about its own axis. A motor gear driven by the rotary analyzer, the higher impeller speed, the fine powder will sorted. In order to ensure that the mill works under negative pressure, the increased air flow is discharged into the bag filter through the residual air pipe between the fan and the host, and then discharged into the atmosphere after being purified. The air selection airflow of the high-pressure suspension roller mill is circulated in the fan-grinding shell-cyclone separator-fan, so it has less dust than the high-speed centrifugal mill, and the operation workshop is clean and the environment is pollution-free.
 

High Pressure Suspension Grinding Mill Features

1. The unique design, as compared to the yield under dynamic conditions with 20-30% other mills, roller compaction force to the material under the action of high pressure increase 800-1200KG spring.

2. finished a wide range of particle size, particle size of 0.95 mm up to the thickest (20 mesh). Fine particle size typically up to 0.033 mm (425 mesh). A small part of the material up to the finest 0.013 mm (1000 mesh).

3. Dust effect is entirely up to the national dust discharge standard.

4. The roller device overlapping multi-stage seal, good sealing performance.
 

High pressure suspension grinding mill supplier

Shanghai Clirik Machinery Co., Ltd. Is an integrated supplier specializing in the production and research and development of ore milling equipment.
The company's main products are calcium carbonate production equipment, fly ash production equipment, lime production equipment, mineral powder production equipment, putty powder production equipment, double fly powder production equipment, stone powder production equipment, calcite powder production equipment, talc powder production equipment, limestone powder Production equipment, light calcium production equipment, heavy calcium production equipment, barite powder production equipment, desulfurized gypsum powder production equipment, feldspar powder production equipment, bentonite powder production equipment, etc. The product has a wide range of uses and can be used for micronization operations in mining, construction, building materials, chemical, highway and other industries.

Previous: Quartz Powder Making Machine

Next: Powder selection system of grinding mill